Choose Channel Components

• Choose Components
• Choose Script Placement
• Important Notes
  • Single Stage and Two Stage Processing
  • Where should I do processing, in the Source, Filter or Destination component?
  • Why is there no processing in a pipeline source channel (“Iguana Channels” target)?

---

Once you have identified the channel structure that you need, you must choose the components for your channel or channels (if you are using a pipeline).

These recommendations are guidelines designed to help you use the Translator effectively, and in most cases they will serve you well. However they are not are not set in concrete, and on some occasions a different structure may be more suitable. If you have a special requirement or just need more help please feel free to contact support at support@interfaceware.com.

Choose Components [top]

Choose the incoming message source (first column), then use the target (second column) to select our recommended source and destination components.

Message Source	Message target	Source Component	Alternative Source	Destination Component	Alternative Destination
HL7 LLP feed	Outgoing HL7 LLP feed	LLP Listener		LLP Client
HL7 LLP feed	Database	LLP Listener		To Translator
HL7 LLP feed	Web Service	LLP Listener		To Translator
HL7 LLP feed	File or FTP	LLP Listener		To File	To Translator: io.open/net.ftp
HL7 LLP feed	Iguana Channels	LLP Listener		To Channel
Message Source	Message target	Source Component	Alternative Source	Destination Component	Alternative Destination
Database	Outgoing HL7 LLP feed	From Translator		LLP Client
Database	Database	From Translator
Database	Web Service	From Translator		To Translator
Database	File or FTP	From Translator		To File	To Translator: io.open/net.ftp
Database	Iguana Channels	From Translator		To Channel
Message Source	Message target	Source Component	Alternative Source	Destination Component	Alternative Destination
File or FTP	Outgoing HL7 LLP feed	From File	From Translator: io.open/net.ftp	LLP Client
File or FTP	Database	From File	From Translator: io.open/net.ftp	To Translator
File or FTP	Web Service	From File	From Translator: io.open/net.ftp	To Translator
File or FTP	File or FTP	From File	From Translator: io.open/net.ftp	To File	To Translator: io.open/net.ftp
File or FTP	Iguana Channels	From File	From Translator: io.open/net.ftp	To Channel
Message Source	Message target	Source Component	Alternative Source	Destination Component	Alternative Destination
Web Service	Outgoing HL7 LLP feed	From HTTPS	From Translator: net.http.get	LLP Client
Web Service	Database	From HTTPS	From Translator: net.http.get	To Translator
Web Service	Web Service	From HTTPS	From Translator: net.http.get	To Translator
Web Service	File or FTP	From HTTPS	From Translator: net.http.get	To File	To Translator: net.http.get
Web Service	Iguana Channels	From HTTPS	From Translator: net.http.get	To Channel
Message Source	Message target	Source Component	Alternative Source	Destination Component	Alternative Destination
Iguana Channel	Outgoing HL7 LLP feed	From Channel		LLP Client
Iguana Channel	Database	From Channel		To Translator
Iguana Channel	Web Service	From Channel		To Translator
Iguana Channel	File or FTP	From Channel		To File	To Translator: io.open/net.ftp
Message Source	Message target	Source Component	Alternative Source	Destination Component	Alternative Destination
Other	Outgoing HL7 LLP feed	From Translator		LLP Client
Other	Database	From Translator		To Translator
Other	Web Service	From Translator		To Translator
Other	File or FTP	From Translator		To File	To Translator: io.open/net.ftp
Other	Iguana Channels	From Translator		To Channel

Choose Script Placement [top]

1. Choose Single Stage or Two Stage processing, see the note below.
2. Choose your components from the first two columns, then choose the recommended script placement from the last two columns:
   

   Source Component	Destination Component	Single Stage Script	Two Stage Script
   LLP Listener	To Translator	Source or Destination	Source and Destination or Filter and Destination [1]
   LLP Listener	Other component	Source or Filter	Source and Filter
   From Translator	To Translator	Source	Source and Destination
   From Translator	Other component	Source	Source and Filter
   From File	To Translator	Destination	Filter and Destination
   From File	Other component	Filter	Not possible
   From HTTPS	To Translator	Source or Destination	Source and Destination or Filter and Destination [2]
   From HTTPS	Other component	Source or Filter	Source and Filter
   From Channel	To Translator	Destination	Filter and Destination
   From Channel	Other component	Filter	Not possible

   1. Use the Filter for your script when you are using the unscripted From LLP “Fast” ACK From LLP setting, or the Source for the scripted “Translator” ACK From LLP setting.
   2. Use the Filter for your script when you are using the unscripted “Legacy” From HTTPS setting, or the Source for the recommended scripted “Translator” From HTTPS setting.

Important Notes [top]

These notes are designed to help you to understand the recommendations in the tables, and to explain our reasoning for some of the (less obvious) choices.

Single Stage and Two Stage Processing [top]

For simple requirements you can use single stage processing but there are some definite advantages to using two stages, particularly with more complex requirements.

So what do you mean by Single Stage Processing? This simply means doing the processing for a simple task in one step (or stage). In the Translator we do this by putting the code for the stage in a single channel component.

So what do you mean by Two Stage Processing? This means breaking the processing for a complex task into two steps (or stages). In the Translator we do this by putting the code for each stage in two separate components within a channel.

Single Stage Advantages:

• Works well for a simple examples
• The code is easy to find because it all in one place

Two Stage Advantages:

• Works well for more complex examples
• Takes better advantage of the Iguana Queue
• Allows you to use the Iguana Logs to resubmit messages when using a To Translator Component

  Note: You cannot use the logs to resubmit messages to a To Translator Component, but if you queue the messages and do the processing in a Filter component you can then resubmit the messages to the Filter.

• Lets you partition the code into a cleaner more logical structure

  Tip: This is a “soft” advantage as you can do all the processing in one component, but it is just not as clean.

Two Stage Scenario: Read messages from a database and forward them as HL7 messages

Use a channel with the following structure:

• Use a From Translator component to poll the database for messages to be processed.
  • Read the message ID from the database
  • Queue the message ID
• The Filter component then uses the ID to read the message data from the database and maps it to the message.
• Finally an LLP Client component is used to send out the HL7 messages.

The main advantage of this approach is that you can easily reprocess messages by using the Iguana Logs to resubmit the message IDs to the Filter component. If you had done all the processing in the To Translator component it would be much more difficult to reprocess messages, as you cannot resubmit them using the Iguana Logs (See the Translator FAQ “Why can’t I resubmit messages to my From Translator component?“). To reprocess messages using the To Translator you would need to modify the database to resubmit the message IDs (which probably requires dealing with a client to make the database updates).

This scenario is the basis for our our Database to HL7 Tutorial.

Where should I do processing, in the Source, Filter or Destination component? [top]

Generally we recommend using the Filter component for processing and filtering messages, though this is more of a style issue rather than a technical one. And if you choose to do processing or filtering in the Source or Destination Component it will work just as well (though it may be a bit less obvious where to find the code).

The one case where there is a major “technical advantage” to using the Filter instead of the Source is when you are using a From Translator component. The advantage is that messages are queued for a Filter component but not for a From Translator (See the Translator FAQ “Why can’t I resubmit messages to my From Translator component?“).

There are two occasions when we don’t recommend using the Filter:

1. When using a From Translator to read data with single stage processing you must also do the processing in the From Translator (using Filter processing would make it a two stage process).
2. When using two stage processing with a From Translator and a To Translator, then you should do the processing (and writing of data) in the To Translator.

Why is there no processing in a pipeline source channel (“Iguana Channels” target)? [top]

We generally recommend that a “pipeline source” channel is simply used to pass messages/data to its target channels. The processing and filtering should be performed in the target channels. Doing it this way is a much more versatile solution, as it allows for different processing and filtering in each target channel (a common requirement).

Possible Exceptions:

1. Good Idea: Adding extra data from a database (or web service etc), you could use the pipeline filter component for this.
2. Reasonable idea: Reformatting data (like dates) into a correct/standard format.
   • For any targets that want a custom format, just reformat again in the target channel.
3. Use with caution: Basic data cleanup like changing custom/incorrect codes to standard ones
   • Issue: One of the targets (or a new target) decides they want the uncleaned data
4. Bad Idea: Removing data that none of the targets need.
   • Issue: One of the targets (or a new target) decides they want the removed data
5. Bad Idea: Filtering out unwanted messages that none of the targets need.
   • Issue: One of the targets (or a new target) decides they want the removed data

Basically anything that filters out messages or removes data in a pipeline channel has the potential to cause problems down the road. If in the future you need the removed data or messages you will need to update the pipeline (to add the data message back in) and then add the filtering to all the target channels. This is not the end of the world, but it would probably have been easier to just put the filtering in the target channels originally.